Moderated by: jk
How to clean your DSLR sensor. -  Rate Topic 
AuthorPost

Posted by jk: Thu Aug 30th, 2018 20:51 1st Post
Here is a method that can be adapted for your use but is tried and tested.

http://www.jmknights.net/photography/downloads/files/Nikon_CCD_Cleaning_Process.doc



____________________
Still learning after all these years!
http://www.jmknights.net
https://nikon-dslr.net/gallery_view.php?user=2&folderid=none


Posted by Robert: Fri Aug 31st, 2018 08:20 2nd Post
Thanks for posting JK. :bowing:

A couple of points I feel need adding...

Use of canned air should be treated with care, some canned air may eject liquid or tiny particles of ice, which may leave marks that can be very difficult to remove. Always use the can in an upright position and test on a window or piece of glass first, especially with a new can.

While the process described is to clean the sensor, it is also very important to brush out any dust or fluff from the mirror chamber with a very clean, soft brush, followed by a blow out with clean air. The mirror flapping up and down will soon shift any dust in the mirror chamber onto the freshly cleaned sensor.

It is always good practice to store and transport cameras lens face down, so any dust or particles in the mirror chamber settle on the front parts of the mirror chamber and not on the shutter, right next to the sensor.



____________________
Robert.



Posted by jk: Fri Aug 31st, 2018 09:47 3rd Post
Yes good points Robert.

I use the ReAir system which is now defunct.
It is a small compressor (bicycle pump with filter inlet), and a reuseable (repumpd) spray canister.

It is very eco-friendly and does not have liquid propellant gas.


I find that since I use so little solvent these days that I seldom need the ReAir but a Giotto Rocket blower is more than enough.
https://www.ebay.co.uk/itm/Giottos-GTAA1900-Rocket-Air-Blower-Black/253487927910?epid=17015518324&hash=item3b050ed266:g:rlgAAOSw8mRap~L6

There are two types of Giotto blower.  The basic one does NOT have a filter, the Rocket does!  Very important that you blow with clean air!



____________________
Still learning after all these years!
http://www.jmknights.net
https://nikon-dslr.net/gallery_view.php?user=2&folderid=none


Posted by jk: Fri Aug 31st, 2018 09:52 4th Post
I just found this.
https://www.amazon.co.uk/Aluminum-Pneumatic-Pressure-Storage-Sprayer/dp/B00YF7Q1TI/ref=pd_lpo_vtph_60_tr_t_2?_encoding=UTF8&psc=1&refRID=GQYK1RZQSPGZ0BPXJ9DD



I will get one for use in UK.



____________________
Still learning after all these years!
http://www.jmknights.net
https://nikon-dslr.net/gallery_view.php?user=2&folderid=none


Posted by Robert: Fri Aug 31st, 2018 11:24 5th Post
I have the Rocket Blower, very good, I also use it to clean my iPhone charging connector.

I like the canister you found... Very nifty, could charge it up from my garage compressor, I'm sure it would be more than sufficient to do the job. My only slight concern is the ability to easily point the nozzle accurately compared with a lightweight blow nozzle on a soft hose like an air brush.



____________________
Robert.



Posted by jk: Fri Aug 31st, 2018 12:55 6th Post
Thought you would like it.
:lol::cheersduo:

I would immediately put some silicone tubing over the nozzle and extend by 1cm. Less scratch hazard!



____________________
Still learning after all these years!
http://www.jmknights.net
https://nikon-dslr.net/gallery_view.php?user=2&folderid=none

Reply
1st new
This is topic ID = 1576  
Nikon DSLR Forums > All about Nikon DSLR Forum > FAQs - Frequently Asked Questions - Read Only > How to clean your DSLR sensor. Top

Users viewing this topic

Post quick reply

Current theme is Blue



A small amount of member data is captured and held in an attempt to reduce spammers and to manage users. This site also uses cookies to ensure ease of use. In order to comply with new DPR regulations you are required to agree/disagree with this process. If you do not agree then please email the Admins using info@nikon-dslr.net Thank you.



UltraBB 1.173 Copyright © 2008-2021 Data 1 Systems
Page processed in 0.1701 seconds (15% database + 85% PHP). 60 queries executed.